These videos will help you understand how you can build mechanisms, cams, robots, export data to SOLIDWORKS, and more.

MD14 Tutorials: Part 1 - Crank-Slider

This video is Part 1 in a series of tutorials that will help you get started with MechDesigner 14. 'Part 1 - Crank-Slider' describes in detail how to add a simple Crank-Slider Mechanism. A Crank-Slider mechanism - or at least the same kinematic elements - is often found in Packaging, Assembly, and Textile Machines.

MD14 Tutorials: Part 2 - Add a Cam

This video is Part 2 in a series of tutorials that will help you get started with MechDesigner 14. 'Part 2 -Add a Cam'. It describes in detail how to add a simple rotating Cam. These mechanisms are often found in Packaging, Assembly and Textile machines.

MD14 - Tutorials: Part 3 - Calculate Cam Coords

This is Part 3 of a series of MD 14 Tutorials. This tutorial Calculates and Transfers Cam-Coordinates from a Cam we have modelled already - see Part 2 - to a SOLIDWORKS cam blank. We use the Cam-Data we transfer from MechDesigner to cut the cam surfaces.

MD Part 4 - Adding and Editing Gears

Part 4 of a series of tutorial videos aimed at getting up to speed with MechDesigner. This video covers editing gears.

MD Pro Part 5 - Using Forces

 

Part 5 of a series of tutorial videos aimed at getting up to speed with MechDesigner. This video covers using forces.

MD Pro Part 6 - Patterns

 

Part 6 of a series of tutorial videos aimed at getting up to speed with MechDesigner. This video covers patterns.

MD Part 7 - Using Design Sets

 

Part 7 of a series of tutorial videos aimed at getting up to speed with MechDesigner. This video covers using design sets.

MD Part 8 - Modelling Robots 1

 

Part 8 of a series of tutorial videos aimed at getting up to speed with MechDesigner. This video covers designing the motion for a robot path.

MD Part 9 - Modelling Robots 2

 

Part 9 of a series of tutorial videos aimed at getting up to speed with MechDesigner. This video covers importing solids from SOLIDWORKS.